Loup Electronics Loup Electronics
Loup Electronics Home Page. Click here to view our products. Click here to learn more about Loup Electronics
Loup Electronics products.
The Loup Electronics Drill Monitors.
The Loup Electronics Drill Scale.Loup Electronics PAC I & II Systems.The Loup Electronics Yield Monitor.Loup Electronics Planter Monitors.The Loup Electronics Moisture Monitor.Loup Electronics Spray Controllers.The Loup Electronics Shaft Monitors.The Loup Electronics Acre Counter.Loup Electronics GPS / Sky Speed.Loup Electronics Planter Sensors.Loup Electronics Guidance Systems.
Loup/RDS Weighlog 100Loup/RDS Weighlog 200Loup Electronics Loadlog 800Loup Electronics Loadlog 8000
Loup Electronics Truck Scale Systems.

Loup Electronics O.E.M. products.


Electronic Acre Counter

A universal Acre Counter that can be used on any piece of field equipment with any shaft or wheel diameter.
Simple to use. Acres are counted as soon as the equipment moves and one touch of a button lets you view the acre totals.
Secure for tracking usage of rental equipment. Password protection is available for all settings including total acres.
An economical way to calculate and measure field and total acres.
Compact with outside dimensions of only
3.1" x 4.2" x 1.5".
Rugged and reliable.


The Loup Electronics Acre Counter.

Battery operated so there is no need for a power cable. Under normal operating conditions, the batteries (three AA required) should last about three years. If the batteries fail, all settings will remain in the non-volatile memory of the acre counter and will be restored when the batteries are replaced.
.
Installation and Operation:
The installation of the Acre Counter is as simple as mounting one magnet on a ground-driven shaft and one sensor to measure shaft turns. Several options of magnet and sensor are available to fit your equipment.

When the Acre Counter is first installed, the display will be blank even though the signals from the shaft sensor are being measured. To activate the display, press the FUNC (function) button. The Acre Counter will then display the current function and the corresponding total. Pressing the FUNC button again allows the next function to be displayed. Words on the display make it easy to see which function is being displayed.

The Acre Counter will calculate and display the Field Acres and Total Acres based on the Pulses per Mile setting (the number of shaft rotations for one mile) and the Implement Width setting. These two factors need to be set to match the equipment being used with the Acre Counter and reset only if a different implement is used.

Loup Electronics - 2960 North 38th St. Lincoln, NE 68504
Phone - 402.464.7131 :: or toll free 1.877.489.LOUP (5687)
e-mail:info@loupelectronics.com - www.loupelectronics.com
Copyright 2002-2008, Loup Electronics. ALL RIGHTS RESERVED